# Orbit Play error messages explained

Source: https://orbitplay.dev/guides/orbit-play-error-messages/ · Updated 2026-11-15

What each message in Orbit Play means and what to do about it, grouped by the
step where it appears. Messages are quoted as the app shows them in English;
in another language they say the same in that language. Numbers such as ports
and versions are examples.

If nothing here helps, export diagnostics from **Console setup → Profile &
connection options** and [report a bug](https://github.com/saawant12/orbit-play-ps5/issues/new?template=bug_report.md).
The export leaves out addresses, names, account IDs and keys.

## Finding the PS5 and starting the helper

### “No Orbit Play helper answered at this address.”

The PS5 at that address isn't running the Orbit Play helper. Check the address
under **Settings → Network → Connection Status** on the PS5, then choose
**Start helper on PS5**, or run `orbit-play.elf` with your payload loader. See
[start the PS5 helper](https://orbitplay.dev/guides/ps5-helper/).

### “The helper is not responding. Keep the PS5 on the same network and run orbit-play.elf.”

The computer can't reach the helper. Keep the PS5 awake and both devices on the
same local network; guest Wi-Fi, client isolation or a VPN can keep them apart.
See [the PS5 isn't found](https://orbitplay.dev/guides/troubleshooting/).

### “Neither Payload Manager (port 8084) nor an ELF loader (port 9021) answered”

**Start helper on PS5** found nothing to send the helper through. Load the
jailbreak, open Payload Manager on the PS5 or enable an ELF loader, then try
again. If yours use other ports, enter them under **Profile & connection
options**.

### “The helper was sent but has not answered yet.”

The PS5 received the helper, but it hasn't started answering. Look on the PS5
for a message, then choose **Find console**.

### “Payload Manager received the helper but did not confirm starting it.”

Check Payload Manager on the PS5 before trying again: the helper may already be
running, so choose **Find console** first rather than sending it twice.

### “Orbit Play 0.8.0 did not start: its port is already in use.”

This shows on the PS5. An older helper is still running, and replacing or
reinstalling the file doesn't stop it. Stop the old helper in Payload Manager,
or fully restart the PS5 (not Rest Mode) and reload the jailbreak, then start
the new one.

### “App 0.8.0; running PS5 helper 0.7.0.”

The helper on the PS5 is from another version. Choose **Replace helper on PS5**:
Orbit Play stops it and starts the one included with the app. Then enter the new
trust code.

### “Someone is streaming from this PS5 or pairing with it.”

A helper is never replaced in the middle of a stream or a pairing. End that
stream, or wait a minute after it stopped, and try again.

### “Payload Manager is not answering, so Orbit Play can't stop the running helper.”

An older helper, or one that doesn't trust this computer yet, can only be
stopped through Payload Manager. Open Payload Manager on the PS5, or restart the
PS5 and reload the jailbreak, then choose **Start helper on PS5**.

## Trusting the computer

### “That code did not match. Check the PS5 notification.”

Enter the six-digit Orbit Play code the PS5 shows now. It changes each time the
helper starts, and it isn't the Remote Play PIN. Without a screen, read it from
`/data/orbit-play/trust-code.txt` on the PS5.

### “Too many code attempts. Wait one minute before trying again.”

After five tries within a minute, the helper accepts no more until that minute is up. Then enter the code the PS5 shows.

### “This PS5 could not save this computer, so it will ask for its code again after its helper restarts.”

The computer is trusted for now, but the PS5 couldn't store that. You'll enter
the code again after the next restart. Check the PS5's storage if it repeats.

## Pairing and account setup

### “Pairing did not finish. Keep the selected PS5 profile logged in and try again.”

Pairing needs the profile shown in Orbit Play to stay logged in on the PS5 until
it ends. Log in again and choose **Pair locally**.

### “The active PS5 user changed. Check the user shown, then pair again.”

Someone switched users on the PS5 while Orbit Play was working. Log in to the
profile you want, then find the console again. See
[switch PS5 profiles](https://orbitplay.dev/guides/troubleshooting/#switch-ps5-profiles).

### “The PS5 rejected pairing. Under Settings → System → Remote Play, turn on Enable Remote Play, then pair.”

The PS5 refused to pair with the profile shown in Orbit Play. On the PS5, go to
**Settings → System → Remote Play** and turn on **Enable Remote Play**, then
choose **Pair locally** again.

### “Setup was interrupted. Choose Restore account settings in Console setup → Profile & connection options before continuing.”

Account setup stopped part-way. Restore the saved settings first, then set up
again; see [restore account settings](https://orbitplay.dev/guides/account-setup/#restore-account-settings).

### “This profile's settings format is not supported. Nothing was changed.”

Orbit Play found account settings it doesn't recognise, so it left them alone.
Export diagnostics and report it before changing account settings another way.

## Starting a stream

### “The stream did not start. Check the PS5 user, login passcode and Remote Play settings.”

Check that the paired profile is logged in on the PS5 and awake, and enter its
login passcode if Orbit Play asks for one.

### “Another Remote Play session is using the console.”

A PS5 takes one Remote Play stream at a time. Close the other app or device's
stream, then start again.

### “The PS5 declined the connection. Check the active profile.”

Usually the logged-in profile isn't the one this computer paired, or it can't
use Remote Play. Log in to the paired profile, or pair this one.

### “The PS5 rejected the live Remote Play permission.”

Mostly seen on firmware other than 13.60. Update to the latest Orbit Play,
choose **Replace helper on PS5**, restart the PS5 and try again; trying another
profile can help too. If it still fails, export diagnostics and add them to
[this report](https://github.com/saawant12/orbit-play-ps5/issues/4).

### “The console and streaming engine versions are incompatible.”

Update Orbit Play and its helper together, then try again.

### “Your stream is open, but the PS5 could not start the chosen game.”

The stream works; only the game under **Start in** didn't start. Start it from
the PS5's home screen, and check it's still installed.

## During a stream

### “The stream disconnected. Check your local network, then try again.”

The connection dropped. Turn on **Reconnect** under **Playback** for up to three
automatic attempts, and lower the bitrate if it happens often. See
[lag and stutter](https://orbitplay.dev/guides/ps5-remote-play-lag-stutter/).

### “The PS5 ended the stream or entered rest mode. Wake it before playing again.”

Orbit Play can't wake a PS5 from Rest Mode. Wake it at the console, then start
playing again.

### “The player stopped. Check your controller, audio device and PS5, then retry.”

The player window closed unexpectedly. Reconnect the controller, check your
sound output, and start again; export diagnostics if it repeats.

## Play away from home

### “Your PS5 isn’t online for play away from home.”

The PS5 is off, in Rest Mode, offline or not running the helper. Someone at home
needs to wake it and start the helper; with **Start the helper by itself on the
PS5** turned on, loading the jailbreak is enough.

### “Orbit Link sees your PS5 but could not connect to it directly.”

The network you're on, or your home router, blocks direct connections. Try
another network or a phone hotspot, or turn on UPnP on your home router. See
[play away from home](https://orbitplay.dev/guides/play-away-from-home/).

### “Still connecting to your PS5 through Orbit Link. On some networks, such as mobile data, this takes up to a minute.”

Nothing is wrong yet: on strict networks such as phone hotspots, finding a
direct connection can take up to about a minute, so wait for it.

### “Orbit Link could not reach its server. Check this computer’s internet connection.”

This computer is offline, or a firewall blocks it. With your own server, check
its address.

### “Another program on this computer is using a Remote Play port.”

Quit other Remote Play apps on this computer, then try again.

### “This computer is no longer in your PS5’s Orbit Link network.”

The PS5 removed this computer. At home, turn **Play away from home** on again
in **Console setup**.

### “That away code didn’t work.”

Each away code works once, for 30 minutes. Get a new one on the PS5's Orbit
Play page: **Play away from home → Get a code**.

## The helper starting by itself

### “Payload Manager is not answering on this PS5 (port 8084).”

Starting the helper by itself is set through Payload Manager. Load the jailbreak
and open Payload Manager, then try again.

### “Payload Manager on this PS5 did not show its Autoload setting.”

Orbit Play couldn't read Payload Manager's Autoload list. Update Payload
Manager, then try again.

## Updates

### “The download stopped. Check your internet connection, then try again.”

**Update now** couldn't finish downloading. Nothing changed; choose it again
when you're online.
